Welcome:

VQ677F VQ677F-16 Pneumatic wafer segment ball valve

Structure: V-port, segment ball, soft seat
Size: DN25~DN500 (1'~20')
Rating: PN10, PN16, CL150
Body: WCB, CF8, CF8M, CF3M
Trim: 304SS, 316SS, 316L
Actuator: Pneumatic cylinder, single & double acting
Accessries: Positioner, air fliter. etc

EMAIL

VQ677F VQ677F-16 Pneumatic wafer segment ball valve

Overview of VQ677F VQ677F-16 Pneumatic wafer segment ball valve

VQ677F VQ677F-16 Pneumatic wafer segment ball valveis composed of GT pneumatic piston actuator and wafer type V-shaped ball valve. Pneumatic piston actuators are divided into single acting and double acting. The sealing forms of wafer type V-shaped ball valve are divided into soft sealing and hard sealing. Because the pneumatic V-shaped ball valve is a right angle rotary structure, it has a strong shear effect when the valve core rotates relative to the valve seat. Therefore, this product is especially suitable for the regulation and control of media with fiber and micro particles. The valve is widely used in petroleum, chemical industry, electric power, papermaking, metallurgy and other industries.


Features of VQ677F VQ677F-16 Pneumatic wafer segment ball valve

Vq677f / PPL pneumatic V-shaped ball valve has large flow capacity due to its simple flow path and small flow resistance; There are two types of notches on the V-shaped ball valve core, i.e. V-shaped with approximately equal percentage flow characteristics and U-shaped with approximately linear flow characteristics, so the flow control with different flow characteristics can be realized without adjusting the positioner; Its adjustable ratio can reach 300:1, which is much larger than the straight through single and double seat regulating valve; The valve has a high sealing grade. The leakage grade of the soft sealing structure is GB / t4213vi and the leakage grade of the hard sealing structure is GB / t4213iv. It is convenient to change the positive and reaction modes of the actuator. The conversion of the action mode can be realized by rotating the initial position of the valve core by 90 ℃.


Main tech of VQ677F VQ677F-16 Pneumatic wafer segment ball valve

Structure: V-port, segment ball, soft seat

Size: DN25~DN500 (1'~20')

Rating: PN10, PN16, CL150

Body: WCB, CF8, CF8M, CF3M

Trim: 304SS, 316SS, 316L

Actuator: Pneumatic cylinder, single & double acting

Accessries: Positioner, air fliter. etc


Note: Any special design or question of VQ677F VQ677F-16 Pneumatic wafer segment ball valve kindly contact the manufacturer for more details.

 

 


INQUIRY